East of England Binocular Centre
Telephone: 01522 807991
Mail Order Only Optical Specialists
Mail Order Only Optical Specialists
Opticron Accessories
Supplied in pairs, these soft rubber objective lens caps are an ideal replacement for lost covers.
Fit binoculars with an outer diameter of 48-50mm (note this is not the objective lens size, but the actual diameter of the binoculars). The soft rubber stretches and provides a good firm fit. The retaining ring ensures that they are not lost! See "Box Photo" link below for an image of them fitted to a pair of Leupold 8x42 binoculars. Apparently, these lens caps also fit the Samsung Galaxy Zoom camera/phone. (We get loads of emails and phone calls asking if we sell lens caps in different sizes, yes we do, just click on the "Accessories" button above, the are all about half way down the page) Stock Availability: Available from stock Show Box Photograph Price shown includes VAT and SHIPPING for this item to: Great Britain and Northern Ireland. Other countries shipping is charged at cost, email for details. This page updated: 10 August 2024 |
|
|||||||||
Relevent links for this item (links open in a new window)
|
Accessories for Opticron Rubber Lens Caps 48-50
|
|||||||||
|
Tom Mansel 27/09/2009 18:48:00 | Hi there,
I have a pair of Kronos 20x60 binoculars, and I was wondering if you can supply rubber lens caps to fit their 75mm overall diameter? Best regards, Tom |
eebc - Chris. 28/09/2009 14:21:55 | Unfortunately, the short answer is no.
I have had a look through various price lists this morning, and none of our suppliers make lens caps of such a size. Someone, somewhere must make them, but at this time, we can not find anyone that does. |
Ronald Beek 09/10/2009 15:10:22 | Hello,
How much for p&p to Republic of Ireland? Regards, Ronald Beek |
eebc - Chris. 09/10/2009 15:51:28 | We would not charge any extra for shipping to Ireland.
The lens caps weigh next to nothing, so the extra it cost us will only be minimal. |
Tony C 29/10/2009 11:33:37 | Hi
could you tell me if rubber lens caps would fit bushnell 10 x 42 natureviews ? |
eebc - Chris. 29/10/2009 16:15:41 | I have just tried to try the lens caps on a pair of Bushnell Natureview that we have in stock, unfortunately, I discovered we do not have any of the lens caps in stock!
They should fit, but it will probably be a tight fit as the Bushnell have lens caps that are 53mm We should be getting some more within the next week or two. When they arrive, I will try them on the binoculars and drop you an email. UPDATE 11/11/09 - These lens caps will not fit the Bushnell Natureview binoculars. |
Jo 02/06/2010 12:38:56 | I have a pair of Night Detective binoculars with a 48mm diameter lens. As these rubber caps range from 48-52mm can you advise me on whether they will be a tight enough fit? |
eebc - Chris 02/06/2010 13:16:35 | Without trying them it is impossible to tell for sure, but I would think that they will be ok.
They have a good secure fit on the Visionary binoculars which are about 48mm. If your binoculars are rubber covered, they tend to grip a little better than smooth metal/plastic finished ones. |
gary 04/06/2010 20:16:34 | i have lost the rear lens caps off my visionary wetland 8x42 binoculars,can they be replaced...thanks. |
eebc - Jamie 05/06/2010 08:42:51 | Yes, they can be replaced and we even have them in stock.
They are £13.50 and are in Olivon packaging, but are identical to the Visionary ones and fit the Wetland perfectly. We do not have them listed on our website, so either give us a call or Click Here to buy on line. |
Ray 11/10/2010 17:51:06 | Does anyone know if these would fit the Canon 10x30 IS binoculars (the binocular aperture is approx 46mm)? |
eebc - Chris. 12/10/2010 11:07:12 | If they are 46mm or slightly larger, these lens caps should fit, if it is slightly smaller, they would probably be too loose.
The only definitive way would to to try them to see if they fit. |
Natalie F 10/01/2011 17:41:11 | Hi
Could you let me know if i can get replacement lens caps for my Bushnell Nature View Plus 8 x 42 Binoculars. Many thanks Natalie |
eebc - Jamie. 11/01/2011 11:32:12 | Thank you for your enquiry.
The only lens caps we have in stock that will fit (I have just tried them on a pair of Natureview) are the Opticron 53-55 Rubber Lens Caps |
Rory 06/03/2011 12:44:32 | Hi, would these fit a pair of Bushnell H20 8x42 binoculars please?
thanks |
eebc - Chris 06/03/2011 13:55:54 | We do not stock the H2O series so I can not try the lens caps on a pair to see.
Chances are they will fit, but the only way to tell for sure is to try them. They do fit on to quite a few x42 binoculars, we have tried them on several binoculars in stock (Leupold, Visionary, Opticron, Swift) and they tend to fit most of them quite well. |
John Snell 23/04/2011 17:26:18 | I have a pair of Nikon Monarch 8x42 and for the price are brilliant. They are let down by the poor quality caps, the eye lens covers fell apart within weeks and now one of the others has failed. The large diameter is 52mm and the small diameter 40mm but tapered. Do you have products that will cater for both ends!!!??
Regards John |
eebc - Chris 23/04/2011 18:00:38 | These lens caps should be ok for the objective (front) lenses.
We do not have an equivalent for the eyepieces, the only thing we have is an Opticron Rainguard which loosely sits over both eyepices at the same time. |
docblues68 28/04/2011 17:05:49 | Will these fit canon 10x30is binos? If not do you have any lens caps that will? |
eebc - Chris 28/04/2011 17:58:06 | We no longer sell Canon stabilised binoculars so can not try a pair on the binoculars to see if they fit.
I would guess (and it is only a guess), that they would be too big for the Canons. They tend to fit x40 or x42 binoculars quite well, the Canon x30 is a lot smaller. These are the smallest lens caps we carry in stock, the best bet would be to get some from Canons spare parts department. |
Ian Birch 08/05/2011 22:00:41 | I have a pair of 8x40 Optolyth Alpin Classic binoculars which have no objective lens caps. The outer diameter is 48-49mm and was wondering if the 48-52 lens caps would be a little loose. Your help would be appreciated.
Thanks |
eebc - Chris 09/05/2011 10:04:46 | The should be OK, we have fitted them to binoculars before which are around 48mm without any problems.
Binoculars at the larger end of the size range, tend to rely on the soft rubber of the lens cap stretching. |
Ian Birch 12/05/2011 20:49:36 | The lens caps 48-52mm I ordered for my Optolyth Alpin Classic 8x40 binoculars are excellent, they fit perfectly and snug without any slipping off. Thanks for your help. |
eebc - Jamie 13/05/2011 11:26:44 | Thanks for your comments, glad they fitted ok. |
Ken 04/08/2011 19:38:24 | I have a pair of Eschenbach Trophy 8x32 binoculars, will any of your caps fit these?
Ken |
eebc - Chris 05/08/2011 09:12:26 | The lens caps we stock are for sizes 48-52, 53-55, 56-62.
I would think your 8x32 would be smaller than any of those above. The make/model you specify seems to be a current model, your supplier will be able to order you a spare set of lens caps. |
phil griffiths 12/09/2011 19:19:00 | Hello,
I have a pair of Swift Audubon 8.5x 44 bins. with an outside diameter of 52mm. Which size would you recommend please. Thanks and regards Phil Griffiths |
eebc - Jamie 10/12/2011 09:11:53 | We do not have any Swift Audubons to actually try the lens caps on, if they are 52mm or slightly less then these lens caps should do the job. If they are just over 52mm, then the larger size would be an easier fit.
The only way to know for sure would be to try the lens cap on and see. |
Kayn 25/01/2012 12:42:20 | Would these fit opticron discovery 8x42? Also is £10 the price of one lens cap or a pair?
Best regards, |
eebc - Chris 25/01/2012 13:20:28 | Thank you for your enquiry, we do not stock the Discovery so can not try a pair on the binoculars to be sure. They do fit the Oregon model, which is about the same size on the front, but the only well to tell for sure would be to try them.
The price is for a pair. |
Barrie 04/09/2012 19:36:24 | Do you stock covers that would fit 56mm objective lens, OD of binoculars is 62mm. |
eebc - Jamie 10/04/2012 09:13:06 | Thank you for your enquiry.
The largest we have is the Opticron Rubber Lens Caps 56-60mm, but whilst these lens caps do stretch, will probably be just a little too small for your binoculars. |
Dave 16/05/2012 15:35:43 | I have a pair of Busnell H20 10 x 42 Binoculars. Do you supply lens covers to fit
Thanks Dave |
eebc - Chris 16/05/2012 15:47:58 | We do not have any Bushnell lens caps, all we have is these rubber Opticron ones (which are available in three sizes) |
Alison 06/08/2012 21:47:44 | Can you supply a replacement lens cap for Swift binoculars Model 803, 10x25
Lens diameter is 33mm. |
eebc - Chris. 11/06/2012 09:16:58 | Thank you for your enquiry.
I have had a look around various suppliers and none of them list eyecups that will fit this model. Sorry we could not have been of any help. |
LAMBERT Jacques 13/06/2012 19:15:47 | Bonjour,
Je possède une paire de jumelles de marque TENTO 20x60. Je recherche les 4 bouchons d objectifs ( 2 bouchons de diamètre 38mm et 2 bouchons de diamètre 76mm ). En auriez-vous ? D avance , merci. |
eebc - Chris 14/06/2012 13:51:07 | Merci pour votre enquête. Nous n'avons pas tout de la taille dont vous avez besoin. Désolé.
Translated by Google |
M Kenley 13/09/2012 21:26:41 | I have an Opticron HR 66 GA ED. Do you have a Rubber Lens cover to fit.
If you do what is the cost and to send to Crete Greece |
eebc - Chris 14/09/2012 10:28:44 | Sorry we do not have any lens caps big enough to fit your HR66 scope. |
peter scott 11/04/2012 20:22:47 | Swift Audubon MK II 8.5 x 44 I am looking for a Rubber eye piece for this pair of binoculars i wonder if you any in stock and the cost plus posting within the uk,thnks |
eebc - Jamie 05/11/2012 09:33:33 | We do not have any spare parts for Swift binoculars.
I would try Pyser SGI they were the importers for years and still offer a repair service for Swift equipment. The Swift Audubon MkII must have been discontinued a good 20 years ago, if Pyser do not have any, I doubt you will find any. |
ron wilson-hunter 11/10/2012 14:16:57 | will these caps fit opticron imagic se 8 x 42 binoculars?
thanks Ron |
eebc - Jamie 10/11/2012 14:27:42 | We do not have any of the ImagiC binoculars in stock, so I can not try a pair on to confirm.
They should fit, but if they do not, you can always return them for the next size up. |
Herbert 12/04/2012 20:39:40 | Will these lens caps fit Olympus EXPS 1 8x42 binoculars? I have measured the outer diameter and it looks as if it would be a tight fit. Many thanks for your advice on this question. |
eebc - Jamie 05/12/2012 09:14:50 | Unfortunately, we do not have any of the Olympus binoculars to try these lens caps on. The only way to tell would be to try them.
You could always return the lens caps for the next size up, if they did not fit. If you are anywhere near Lincoln, bring your binoculars in and we will try the lens caps. |
Ken Blackman 12/05/2012 15:23:55 | I have a pair of Eschenbien 8-15x35 with a lens OD size of 49mm, will your caps fit ok? |
eebc - Jamie 05/12/2012 15:30:46 | Yes, if they are 49mm they should fit just fine. |
Kenneth 12/08/2012 13:30:25 | Received covers this morning...very fast delivery......perfect fit, thank you |
eebc - Chris 09/12/2012 11:58:39 | Glad to help. Although not considered essential by many manufacturers who no longer include lens caps, I always feel it must be safer to have the lenses covered up when not in use. |
Brian Lawlor 03/05/2013 13:23:51 | Hi, I have a set of Nikon Monarch 8x36 binoculars which have an external
objective dia. of about 46mm. Obviously, I have already lost one of the loose plug-in lens covers supplied! Will the Opticron 48-52 still grip at this slightly smaller size? |
eebc - Jamie 06/03/2013 09:19:29 | Thanks for your enquiry.
48mm really is the smallest these lens caps will cling-on to. Unfortunately, these are the smallest lens caps we can currently obtain. We have had customers report that they have successfully modified these lens caps by padding them out with bits of old rubber (one chap cut off the actual retaining ring and used that as padding), but that seems like a lot of hassle to me! |
John Squire 04/03/2013 15:51:30 | Having bought a Canon 12 x 36 binocular a little while ago now, I find I really could do with a pair of lens covers. They were supplied with eye covers, but not the other end! Would these be ok with the Canon? Thank you |
eebc - Chris 03/04/2013 16:58:24 | Thank you for your enquiry.
Unfortunately, we no longer stock Canon binoculars so can not try the lens caps on a pair, but I doubt that they will fit, I would think they would be too large for the binoculars. We have had quite a few customers modify the lens caps by inserting a bit of padding, measure the outside diameter of the binoculars, the lens caps will fit binoculars 48mm in diameter, someone used the actual retaining strap and glued it in the lens caps which took a couple of millimetres off and allowed them to fit some smaller binoculars. |
barry 17/04/2013 18:06:28 | have you any end caps to fit a pair of bushnell legend ultra binoculars 10 x 42, rubber, thanks |
eebc - Jamie. 17/04/2013 18:10:48 | We do not stock the binoculars you mention so can not try them, but the ones shown on this page may fit (they tend to fit most x42 binoculars).
If you are anywhere near Lincoln, just pop them in sometime and we will try these and the next size up to see which ones fit best. |
Phil 06/09/2013 00:30:16 | Hello - I have an older [25yrs] Opticron Binocular Dioptron 10x50 Field 5deg. Looking to replace both end caps which have a stamp showing 61 which is the outer diameter of the objective lens case. Looking to replace as I have lost a cover. The end of the outer case is rubberised so may accept a 60mm cap. Is there any solution.
The eye piece relief caps are soft and long enough [16mm]to stop most external light but could be better with a shape which shields the outer edge arround each eye -again is there a solution |
eebc - Jamie 06/09/2013 14:30:52 | We sold quite a number of the Dioptron binoculars, good binoculars.
The larger rubber lens caps may fit, the largest is the Opticron 56-60mm Lens Caps As for the eyepieces, unfortunately there is currently nothing available, about 10 years or so ago, there were "winged" eyecups, I think they would probably have been too big, but these are no longer available. I did speak to one chap who managed to fabricate himself something similar out of an old bike inner tube! |
buffers 14/09/2013 15:11:26 | i have lost one of the rubber eyecaps off my bushnell 10x42 binooculars is it possable to replace. |
eebc - Jamie 14/09/2013 17:53:41 | We do not have any of the original lens caps, just the ones shown on this page and the slightly larger ones which fit the 10x42 Natureview models. |
sue 19/10/2013 16:18:51 | do you do the covers that fit over the eye piece for a Opticrom Imagic BGA oasis 8 x 25 Field 6.3 (all info I could find on binoculars) my husband managed to lose one on holiday! thanks |
eebc - Chris 21/10/2013 09:31:14 | We do not have any of these in stock. We could tag a pair onto our next order with Opticron. |
anair 11/11/2013 20:21:50 | Hi,
I have a nikon monarch 10x42 binoculars and I lost one of the objective lens caps.Do you any replacement caps that would fit? Many thanks |
eebc - Jamie 12/11/2013 13:26:36 | Thank you for your enquiry.
These on this page may fit, what is the physical size of your N.Ikon binoculars across the outside of the objectives. Either these or possibly the next size up should be ok. |
mark 05/12/2013 15:00:30 | Hi im after a pair of Lens caps for barska black hawk 12 x 50, have you got any in stock ? |
eebc - Jamie 05/12/2013 15:18:52 | Thank you for your enquiry.
We do not stock any Barska products, the Opticron 56-60mm one may fit, but as we do not stock your binoculars can not try them on here to judge fit. Pop the binoculars in sometime and we will try the lens caps on, alternatively if you order an pair and they do not fit, just send them back for exchange or refund. |
paul heath 08/04/2014 02:41:32 | I have a pair of bushnell 8x42 powerveiw would these caps fit them. Also do have the eye ones aswell. |
eebc - Jamie 08/04/2014 09:55:08 | It would either be these lens caps or the next size up (the 53-55mm ones), we do not stock the PowerView binoculars so can not try the two together to see which is the best fit.
All we have for the eyepiece end is Rainguards If you order and they are the wrong size, exchanging them for the next size up or down is no problem. |
Mark Powis 04/06/2014 19:28:13 | Hi in your Q&As you say the caps are 48-52 but page says 48-50. I have a pair of Nikon Prostaff 7s and the End is 50 but increasing slightly along the barrel. Would these fit?
Mark |
eebc - Chris 04/06/2014 21:43:48 | Opticron recently changed the product specifications, but kept the same part number and same bar-code number.
They were 48-52mm, but now there is two separate products: 48-50mm and 50-52mm. I would think these would fit your Nikon binoculars, but the only well to tell for sure would be to try them. If they do not fit you could always return them for a refund or the next size up, or if you are anywhere near Lincoln bring your binoculars in and we will try this and the next size up to see which fits best. |
TONY 10/07/2014 13:58:38 | Hi
Ihave a pair of canon 12x36 is binoculars have you any good caps that will fit ?I am also looking for a good quality case |
eebc - Jamie 10/07/2014 14:26:13 | We have various sized lens caps all on our website (40-42, 42-44, 47-48, 48-50, 50-52, 52-53, 53-55, 56-58, 58-60, 60-62), as we no longer stock Canon binoculars, unfortunately I can not measure a pair or try a few pairs on to see which ones fit best.
Binocular cases - we do not currently stock any binocular cases, we can get the Zeiss ones, prices start around £100 for a hard leather case. |
Peer 16/08/2014 11:16:17 | I have a pair of Konica Minolta 8x42 binoculars. The outer diameter is 52mm with a rubberised finish. Which size lens cap do you think would give the best, and a secure, fit - 50-52 OR 52-53 or any other? |
eebc - Jamie 16/08/2014 11:31:33 | As an educated guess, I would go for the 52-53mm ones.
Unfortunately, as we do not have a pair of your binoculars to actually try the lens caps on, we can not be sure, but if they are too loose, they can always be returned for the smaller ones. |
malcolm scholes 31/05/2015 11:04:08 | Can you locate or do you happen to have in stock a one piece zeiss lense cap for a pair of Zeiss 8x52 dyalit binoculars? The soft rubber eyepiece has a dimeter of 40mm. |
eebc - Jamie 31/05/2015 15:49:44 | Sorry, we do not stock the Zeiss rainguards, only the Opticron ones shown elsewhere in the Accessories section. |
Francesco 08/09/2015 13:57:34 | i'm interest on a pair of opticon Rubber lens cap for binocular leupold 10x42.
How mach is the shipment in italy for that item? THX! |
eebc - Jamie 08/09/2015 14:21:17 | No problem, we have them in stock and can send them almost anywhere.
Shipping to Italy would add £2.00 Here is a link to add shipping to your order |
Clive Adams 06/10/2015 09:08:58 | I have pair of Zeiss Dialyt 10x40B with the objective lens overall diameter measuring 48mm and which is hard metal outer. Would these fit? |
eebc - Jamie 06/10/2015 09:49:21 | The only way to tell for definite would be to try them, but they should fit.
The can always be changed for the next size up or down if necessary. |
david goddard 21/11/2015 17:04:09 | I have a zeiss 8x42 victory FL. Do you have lens caps for each end ??
thanks |
eebc - Jamie 23/11/2015 08:52:51 | We should have some lens caps for the objective lens, we have the Opticron rubber lens caps in all sizes from 48 to 62 mm currently in stock.
The best we can do for the eyepiece end would be a rainguard, one of the Opticron Rainguards would probably fit. |
Linda Gore 13/01/2016 17:18:07 | Hi there, can you tell me will these caps fit an Opticron imagic BGA SE 10 x 42 binoculars, if not what size would I require? Many thanks |
eebc - Chris. 13/01/2016 18:01:38 | Sorry I can not give you a definite answer - we do not stock the binoculars you have, so can not try a few pairs of lens caps to see which is the best fit.
Chances are it will be either these, or the next size up (50-52mm). Pop a ruler across the objective lens and try and measure it. We can always swap the lens caps for the next size up or down if necessary. If you are anywhere near Lincoln, bring the binoculars in, we usually have the full range of lens caps in stock. |
mr eric howard 06/04/2016 20:42:54 | Am seeking replacement V23 cap covers for my Zeiss 10x 25B binoculars, No:2o13012.
Can you please help? Eric Howard |
eebc - Chris 07/04/2016 09:26:23 | I know exactly the items you are looking for, we tried to order some for a customer years ago and was told they were not lens caps, but packing pieces.
Best bet would be to give Zeiss a ring, their contact details are available on their website: Zeiss Sports Optics |
Antonio 23/04/2016 22:05:04 | 2 pair of rubber Lens caps 48-50
How much total cost with shipping to Italy? best regards Antonio |
eebc - Chris. 24/04/2016 14:28:01 | Thank you for your enquiry.
I have put a link into the "Accessories" section above (just above these questions and answers) for International Shipping. Shipping on 2 pairs, would not be much different to that for one pair, in which case shipping would add £2.00 Delivery to most of Europe seems to take about a week. Shipping would be by Airmail. |
doug 08/05/2016 10:46:14 | Hi, I have a pair of Nikon Monarch 8x42 binoculars. The left eye cup: threaded part that screws onto lens, is cracked and loose so that it won't function. Also the front lens covers on both pairs; ie 4, are lost due to the plastic straps; attached to the body, haves broken. Could you advise.
Thanks |
eebc - Jamie 09/05/2016 09:24:49 | We have sold a number of these lens caps for Nikon Monarch binoculars, so am fairly confident that they should fit. If they do not we can always swap them for the next size up or down.
The eyecup assembly would have to be supplied from Nikon or via a Nikon dealer. Any Nikon should be able to order the spares for you. |
Rob Cann 30/05/2016 09:41:14 | Hi, I have a pair of Celestron Granite 8x42 ED binoculars. I have lost one of the objective lens covers and I wondered if you could supply a replacement? |
eebc - Jamie 31/05/2016 09:54:52 | We do not have any dealings with Celestron, so can not supply the original ones which clip on to the binoculars. Any Celestron dealer will be able to order then as spare parts.
The nearest equivalents we have would be the Opticron 50-52mm lens caps. |
Robin J Taylor 12/01/2017 18:12:18 | Hello I am looking for replacement lens caps for a pair of Nikon 7x50 7.2 CF WP binoculars. Can you help please? |
eebc - Chris 14/01/2017 12:18:42 | One of the larger sizes of rubber lens caps should fit:
Opticron 56-58mm Lens Caps Opticron 58-60mm Lens Caps Opticron 60-62mm Lens Caps Simply measure across an objective lens, including the actual casing. We can easily swap them for the next size up or down, if you get the wrong size. |
Graham M Biddulph 01/02/2017 04:25:17 | Hi,need rubber eye pices 40 to 42mm with the 'loop', as per the picture, to suit my Nikon Prostaff 7, binoculars.
Do you have any? The objective, front one's bought a while back are great. Appreciate your assistance, Regards Graham Biddulph |
eebc - Chris 01/02/2017 11:52:39 | We do have smaller lens caps in stock.
Here is a link to the Opticron 40-42mm Lens Caps the other option would be a Rainguard but it would require a little padding with something (a bit of rubber/felt). |
David 14/07/2017 11:18:41 | Hi, which size replacement lens caps would be suitable for Bushnell Legend Ultra HD 8x42?
Thanks |
eebc - Jamie. 15/07/2017 10:30:08 | Thank you for your inquiry.
As we do not stock the model of Bushnell you mention, we can not literally try a few pairs on to see which fits best. I would guess either the 50-52mm ones or the next size up, the 52-53mm. Pop a ruler across the objective lens and try and measure them. We can always swap lens caps for the next size up/down if you get the wrong ones. |
Alison Lovett 04/12/2017 13:50:26 | I am looking for replacement lens caps for the Canon 15x50 Image Stabilizer All Weather Binocular. Will these lens caps fit? Or do you stock the actual replacement lens caps? Look forward to hearing. Many thanks. Alison |
eebc - Jamie 04/12/2017 18:41:21 | Thank you for your inquiry.
For a 50mm objective lens, the lens caps are normally around 56-60mm (50mm is the size of the glass, you then have metal, plastic, rubber housing around it). I would guess either the 56-58mm or the 58-60mm ones. Just pop a ruler across the lens and measure the outside diameter. We can always swap for a larger or smaller size if they tune out to be too tight or loose. |
warren 12/01/2018 22:32:10 | I purchased some for celestron 7x35 binoculars for which I did a video and did a plug for EEBC towards the end. YouTube |
eebc - Jamie 15/01/2018 09:37:34 | Glad they fit and you are happy with them. |
TomP 18/03/2019 14:49:22 | I have Canon 12x36 IS ii binoculars and have lost all the lens and eyepiece covers, so can you help? |
eebc - Chris 19/03/2019 10:22:23 | We have had reports that the 48-50mm Lens caps will fit the Canon binoculars, but as we no longer stock Canon binoculars, we can not try it for ourselves.
The smaller lens caps we have, the 38-39mm ones may fit the eyepieces. |
S Hall 06/08/2019 19:23:43 | Can I get a replacement right eye piece for my Visionary Wetland 10 x 25 binoculars? |
eebc - Chris 07/08/2019 12:05:14 | The manufacturers should be able to help you with that, their contact details are available on their website at:
Optical Hardware Contact page They also have a little form on that page for asking questions. |
Karen 08/11/2019 09:57:19 | Hi I have a pair of 12x36 and 10x30 Canon Bono’s and need replacement eye cover pieces for both. What size will I need. Thanks. |
eebc - Jamie 08/11/2019 11:33:34 | We have had reports that the 48-50mm Lens caps will fit the Canon 12x36 binoculars, but as we do not have any of the Canon binoculars, we can not try it for ourselves.
There is currently 13 different sizes of lens caps, we should have something to fit, if you are anywhere near Lincoln pop them in one morning and we will try and get some to fit. We currently have all the sizes in stock. |
Michael Findlay 11/11/2019 18:16:23 | Hi,
Would these fit the celestron trailseeker 10x42 binoculars Thanks |
eebc - Jamie 12/11/2019 17:18:30 | Thank you for your inquiry.
We do not sell any Celestron products so can not try the lens caps on some and see. The 48-50mm do tend to fit a lot of binoculars with a 42mm objective lens. Pop a tape measure across the lens and measure the outside diameter, chances are it will be either these or the next size up. |
Sue Cotton 10/01/2020 15:17:31 | Do you do front lens caps to fit a nikon prostaff 7s please
|
eebc - Jamie. 11/01/2020 12:05:15 | We should have something to fit.
We do not sell any Nikon equipment, so have no idea of sizing. Binoculars can be measured with a tape measure or ruler, just measure across the front lens and chassis of the binoculars. If you are anywhere near Lincoln, we have all the lens caps in stock at the minute, just call in and we will see if we can find a good fit. |
eebc - Jamie 08/06/2020 17:03:11 | Thank you for your inquiry.
We do not stock any Olympus spare parts, I would think the only people you would get them from would be Olympus, I am not sure of their current details, but they used to be at Honduras Street, London. We do have plenty of the Opticron spare lens caps as shown on this page and in various other sizes (see here), they are made of a flexible rubber, rather than the hard plastic of the original Olympus ones. |
J C Crowley 21/09/2020 12:31:54 | Caps arrived promptly. They're spot on; fit perfectly. Many thanks. |
eebc - Jamie 22/09/2020 11:57:40 | Glad they got there OK, never sure how long international deliveries are going to take. |
David Aldred 13/12/2020 23:12:31 | Dear Sir or Madam
I own a pair of Olympus 10x42 EXPS 1 Binoculars. I have broken the coupled front lens caps and lost a large rear one. Please can you advise as to the replacement cost for these items. I look forward to hearing from you in due course. Many thanks. With kind regard, David Aldred |
Alison Finch 14/12/2020 12:11:33 | Will this fit Nikon Prostaff 7S binoculars? I have measured them and I think it should be OK, but wanted reassurance!
Best wishes ALison |
eebc - Jamie 15/12/2020 18:08:05 | We sell Rainguards for the eyepieces, the only lens caps we have are like those shown here, rubber with bands to secure them to the binoculars.
Rainguards are currently £7.50 Lens Caps are currently £13.00 |
eebc - Jamie 15/12/2020 18:11:57 | I think these fit the 8/10x42 Prostaff models. We are not a Nikon stockist so can not try them on a pair, but someone else bought a pair of these for some 10x42 prostaff and did not send them back for swapping for another size. |
Peter Cairns 14/05/2021 09:59:05 | I have a pair of Minolta standard 10*50 binoculars.
The outer diameter at the objective end is 61 mm (~ 2 & 3/8 inches). The outer diameter at the eyepiece end is 42 mm (~ 1 & 11/16 inches). Do you sell these sizes of lens covers? |
eebc - Jamie 14/05/2021 13:11:10 | I would go for the Opticron Rubber Lens Caps 60-62mm Opticron Rubber Lens Caps 42-44mm or possibly a rainguard if you prefer that option. Everything is listed in our Accessories section |
Steve Low 24/09/2022 18:02:28 | Do you have in stock a set of eye covers and lens covers for Halina Discovery 20×50 biniocular,also a case to fit and replacement binocular strap.
Thanks in advance steve |
eebc - Jamie 29/09/2022 11:44:55 | Hi Steve
We should have some objective covers (front lens) to fit, there is a full list of sizes in our Accessories section. The lens caps we sell probably will not be small enough for the eyepieces, although we do have Rainguards that simply sit over the eyepieces. We do not stock spare binocular cases - finding the correct size is almost impossible without a actually trying the binoculars in the cases. Straps - normally we stock the Opticron ones, however we are out of stock at the current time. We should be able to find you a second hand strap from our "box of bits" that will do the job (although it might have Pentax or something written on it) |
Joe Dowdall 21/08/2023 09:50:28 | Do you stock eye cups for Olympus 8x42. Thanks Joe |
eebc - Jamie 23/08/2023 11:29:57 | Thank you for your enquiry.
We do not stock the Olympus ones, for those it would be a case of contacting Olympus directly. We should have some universal ones that should fit, just pop a ruler across the objective lens and measure the outside diameter of the binoculars. The ones we have are flexible rubber and can be found on our website in the accessories section: Accessories |
Glenys 19/02/2024 14:55:27 | Hi, I have a pair of Bushnell Trophy 8 x 32 XLT and need a spare eye piece. The plastic bit inside the eye piece that twists up has broken, only the rubber is left. Any help would be appreciated. Thanks. |
eebc - Jamie 22/02/2024 22:41:54 | Thank you for your enquiry.
We do not carry any spares for Bushnell binoculars, there are three different importers for Bushnell equipment currently listed who should be able to supply spare parts, their details are: EDGAR BROTHERS Unit 3, Heather Close, Lyme Green Business Park MACCLESFIELD, CHESHIRE SK11 0LR Telephone 01625 613177 Email: shootingsports@edgarbrothers.com Web: http://www.edgarbrothers.com/ S M GROUP (EUROPE) LTD Mercatur House, 22 Brest Road Plymouth PL6 5XP Web: www.smgeurope.com TRANSCONTINENTA UK LTD. 96 Plymouth Road, Slough Trading Estate Slough SL1 4LP Web: www.transcontinenta.co.uk |